High Density Chipboard Wall Panel

High Density Chipboard Wall Panel is a man-made board made of wood shavings as the main raw material, which is pressed under high temperature and high pressure. It is often used in indoor wall decoration, furniture manufacturing, building partitions and other fields. The following is its core information analysis:
1. Product characteristics
Material composition
Main raw materials: wood shavings (such as pine, birch, etc.), urea-formaldehyde resin (adhesive), additives (waterproofing agent, flame retardant, etc.).
High density characteristics: density is usually 650-800 kg/m³ (higher than medium-density fiberboard), with tight structure and high strength.
Physical properties
Compressive strength: ≥15 MPa (better than ordinary chipboard), suitable for load-bearing or impact-resistant scenarios.
Water absorption: ≤8% (moisture-proof products can be as low as 3-5%), moisture-proof performance is better than ordinary chipboard.
Surface flatness: tolerance ±0.3 mm/m, easy to veneer decoration (such as veneer, PVC film, paint, etc.).
Environmental protection level
Formaldehyde emission: Common levels are E1 (≤1.5 mg/L) or FSC certification (environmentally friendly products), which meet indoor use standards.
2. Main application scenarios
Indoor wall decoration
Replaces traditional wood veneer panels and is used for wall shapes in living rooms, bedrooms, offices, etc., and can be matched with paint, wallpaper or decorative film.
Advantages: low cost, easy installation, customizable carving or slotted design.
Building partitions
As a lightweight partition material, it is used for commercial spaces and hotel partitions and can be used in combination with light steel keels.
Note: The appropriate thickness needs to be selected according to the height of the partition (such as ≥12 mm for high partitions).
Furniture manufacturing
Manufacturing wardrobes, bookcases, TV cabinets and other cabinets, especially moisture-proof products suitable for humid environments (such as kitchens and bathrooms).
Tooling and customization projects
Shopping mall showcases, store decoration, exhibition construction, etc., can be quickly cut and processed to reduce construction costs.