What Should We Pay Attention To When Constructing Wood Plastic Panels?

1. When constructing wood-plastic flooring, the first thing we must ensure is the condition of the base of the construction site. The ground must be clean and flat. This aspect is very important. Do not ignore this aspect and reluctantly construct it just to save trouble, otherwise it will easily cause installation failure.

2. For wood-plastic flooring, the center distance of its keels must be controlled during construction. Normally it is between 310 mm and 41 mm. At the butt joints at its ends, a gap of about 10 mm needs to be left. This will facilitate later drainage. At the same time, the parts between the keel rows need to be staggered, and they cannot be placed on the same straight line. In addition, the allowable error of the distance between keels must be less than 10 mm, which needs to be paid attention to during acceptance.

3. Normally, the ground condition of the base layer at the construction site is relatively poor, and the overall structural stability will be relatively weak, so steel keels need to be selected to replace wood-plastic keels, and galvanized steel must be used as steel to ensure the construction effect.

4. During construction, you also need to pay attention to the size of the floor splicing gaps, which can be determined according to the temperature and humidity of the environment. The length and moisture content of the floor must also be clearly defined.