Pvc Uv Marble Sheet 2.6mm Thickness

If there are scratches on the surface of the high-gloss UV board, you can try the following methods to repair it:
Minor scratches:
Toothpaste polishing: Apply toothpaste to the scratch, gently wipe with a clean soft cloth, and then wipe dry with a damp cloth.
Waxing: Use car wax or furniture wax, apply it to the scratch, and wipe with a soft cloth until the scratch disappears.
Use a cleaner: Choose a cleaner suitable for high-gloss UV boards and clean it according to the instructions to remove minor scratches.
Deeper scratches:
Sandpaper polishing: Use 600-grit or 800-grit sandpaper to gently polish the scratch, and then wipe dry with a damp cloth.
Fill scratches: Use repair paste or putty of the same color as the high-gloss UV board to fill the scratch, and then sand it flat with sandpaper.
Repainting: If the scratches are deep, you can consider repainting. It should be noted that repainting requires professional equipment and technology, and it is recommended to find a professional to operate.
When repairing scratches on the surface of high-gloss UV boards, you need to pay attention to the following points:
Choose the appropriate repair method: Choose the appropriate repair method according to the depth and degree of the scratch. If you are not sure how to repair, it is recommended to consult a professional.
Pay attention to the repair order: When repairing scratches, you need to follow the correct order to avoid causing greater damage.
Avoid over-repair: When repairing scratches, you need to avoid over-repairing to avoid affecting the appearance and quality of the high-gloss UV board.
Regular maintenance: In order to maintain the appearance and quality of the high-gloss UV board, regular maintenance is required, including cleaning, waxing, etc.