3D WPC Uv Marble Sheet

The steps of installing UV panels mainly include the following stages:

Prepare the base layer: First, you need to cover the wall with a base layer. Commonly used materials include plywood, fireproof glass magnesium board, wood board, etc., with a thickness of about 3mm. Use air nails to nail the base material to the wall, and clean the surface with sandpaper to ensure that the base is flat and clean12.

Measurement and cutting: Measure and cut the UV board according to the actual installation requirements. Use a saw or professional cutting tool to cut the UV board to the required size. If necessary, you can use a chamfering machine to process the edge of the board, such as chamfering it into a 45-degree bevel to meet the installation requirements12.

Cleaning the back of the UV board: Before installation, use sandpaper or a rag to clean the back of the UV board to ensure that the adhesive can adhere better12.

Installation: Apply all-purpose glue or wood glue evenly on the back of the cleaned UV board, and then stick the board on the base layer of the wall. ‌ Lightly beat the board with your hands to ensure that it is firmly attached to the wall12. ‌

Jointing: After the boards are pasted, use water-based caulk to fill the gaps between the boards to ensure the appearance and structural integrity12. ‌

Cleaning: Finally, clean off the excess caulk on the surface to ensure that the surface of the installed UV board is clean and tidy