2.5mm UV Marble Sheet PVC

The service life of high-gloss UV panels can be extended by the following methods:
1. Correct installation
Choose professional installers: Ensure that the installation process is standardized to avoid damage to the panels due to improper installation. For example, when fixing the panels, the force should be moderate to prevent the panels from cracking due to over-tightening of the screws.
Ensure that the installation environment is dry: Before installation, the wall or base must be dry to avoid the humid environment affecting the fit and service life of the panels. If installed in a humid area, consider using a moisture-proof agent or taking moisture-proof measures.
2. Daily cleaning and maintenance
Moderate cleaning frequency: Clean the high-gloss UV panels regularly, but not too frequently to avoid wearing the surface. Generally, cleaning once or twice a week is sufficient.
Use appropriate cleaning tools and detergents:
Tools: Choose a soft damp cloth or sponge for cleaning, and avoid using rough rags, steel wool, etc. to avoid scratching the surface.
Detergents: Use mild neutral detergents, and avoid using strong acids, alkalis, or corrosive detergents. The detergent can be diluted for use to reduce irritation to the panels. For example, use diluted dishwashing liquid or a special furniture cleaner.
Avoid contact with high-temperature objects: High-gloss UV boards are not resistant to high temperatures. Avoid placing hot pots, kettles, etc. directly on the board surface to avoid deformation, discoloration or damage to the surface gloss. You can use heat insulation pads or trays to place high-temperature objects.
Prevent scratches from sharp objects: In daily use, avoid sharp objects such as knives and keys directly contacting the board surface. When placing items, be gentle to prevent collisions and scratches.
3. Environmental control
Avoid direct sunlight: Long-term direct sunlight will make the board color lighter, reduce the surface gloss, and even cause the board to age. You can use curtains, blinds, etc. to block the sunlight, or install the board in a location with less direct sunlight.
Keep the room well ventilated: Good ventilation can reduce the impact of humid air on the board and reduce the risk of mold and deformation. Especially in humid seasons or areas, open windows frequently for ventilation, or use dehumidification equipment.
Control indoor temperature and humidity: Avoid the board in an environment where the temperature is too high or too low and the humidity is too high. The suitable temperature range is generally 15℃ - 25℃, and the relative humidity is controlled between 40% - 60%. Air conditioners, humidifiers and other equipment can be used to adjust the indoor environment.
4. Regular maintenance
Waxing or polishing: Regularly waxing or polishing the high-gloss UV board can increase the gloss and wear resistance of the surface and extend the service life. Generally, it can be done once every six months to one year.
Inspection and repair: Regularly check whether there are scratches, damages, etc. on the surface of the board, and repair them in time. For small scratches, toothpaste, car wax, etc. can be used for repair; for larger damage, it is necessary to ask professionals to handle it.