1200mm SPC Wall Panel Bathroom Decoration

‌The installation method of SPC stone crystal board mainly includes the following steps‌:

‌Prepare tools and materials‌: Make sure you have enough SPC stone crystal boards, suitable cutting tools (such as serrated knives or electric cutters), adhesives (if necessary), measuring tools, etc.
‌Measurement and cutting‌: According to the size and layout of the room, use measuring tools to determine the size of the SPC stone crystal board and make precise cuts. Make sure the cutting edges are flat to avoid burrs or unevenness.
‌Clean the floor‌: Before installation, make sure the floor is clean, dry and oil-free. Use detergent and damp cloth to clean the floor to ensure that the SPC stone crystal board can be firmly bonded to the floor.
‌Laying the stone crystal board‌: Starting from one side of the room, place the SPC stone crystal board on the ground, making sure that each board fits tightly without gaps. Use adhesive to fix the board edges, or use special adhesive tape to fix them.
‌Handle corners and edges‌: At corners and edges, special treatment may be required to ensure the flatness and stability of the stone crystal board. Specialized corner codes or cutting techniques can be used to handle these areas.
‌Inspection and Adjustment‌: After installation, conduct a comprehensive inspection to ensure that all stone crystal panels are firmly fixed to the ground without looseness or unevenness. Make appropriate adjustments as needed.
‌Care and Maintenance‌: After installation, perform appropriate care and maintenance to avoid heavy objects hitting or using sharp objects to scratch the surface of the stone crystal panel. When cleaning regularly, wipe with a soft damp cloth and avoid using chemical cleaners.